COX 764 MITSUBISHI 3 Layer BOPP Coextrusion Line With KATAOKA SLKA 700 Primary Slitter

Year 1989

Capacity: 600 MT/month

Maximum Speed: 220  mpm

Film Width  (with edge): 5800 mm

Description

Year 1989

Capacity: 600 MT/month

Maximum Speed: 220  mpm

Film Width  (with edge): 5800 mm

  • Feeding Hopper : Type SV mixer, Cap 1 m3
  • Main Extruder 1 : Ø Screw 135, Speed 38-490 Rpm, L/D Ratio 17, Include Feed Throat Portion
  • Main Extruder 2 : : Ø Screw 175, Speed 10-130 Rpm, L/D Ratio 20, Include Melt Feed Portion
  • Satelite Extruder A and B
  • Ø Screw 75mm Barrier Type, Speed 10.5-105 Rpm, L/D Ratio 29, Include Feed Throat Portion
  • Output Max 70 Kg/Hours
  • Die : 3 Layer Die, Type Three Cavity T-Die With Flexible Lips
  • Width Lips 800m Gap of Lip 2.4 +- 0.7mm Adjust by Push Pull
  • Bolt Adjusting Bolt with APC Unit
  • Casting Machine : Speed 5-50m/min, Sheet thickness 0.5-3.0mm
  • Temperature Range 20-80 Celcius Degree
  • Cooling Roll Diameter 1000 (1 Pcs) 1200 (2 Pcs) Surface 0.2 Micron (Mirror)
  • Thickness Gauge (Between Cast – MD Section), and PRS Section for Film Scanner Completed Set

Install New one with Thermofisher at 2015

  • Longitudinal Strecthing Machine (MDO)
  • Speed
  • Low Speed Section 5-50 m/min
  • High Speed Section 22-220 m/min
  • Temperature: Low  Speed Section 100-150 Celcius Degree, High Speed Section 70-150 Celcius Degree
  • Tenter Frame Machine (TDO)
  • Machine Speed 22-220 m/min
  • Working Width Inlet 500-800mm
  • Outlet 5000-5800 mm
  • Film Thickness Inlet120-500 Micron,
  • Outlet 12-50 Micron
  • Stretching Ratio Max 1:10
  • Pull Roll Stand Machine

Consist of

  • Trimmer Section : Machine Speed 22-220 m/min
  • Treater Section : Machine Speed 22-220 m/min

Winder

  • Machine Speed 22-220 m/min
  • Max Winding Diameter Ø 800
  • Core Steel Ø400 x 5800 mm